Description:

Heavy Duty Rubber Flooring Roll – 1.3m Wide, 3mm Thick

The  Heavy Duty Rubber Flooring Roll is a black rubber floor covering designed for garages, workshops, vans, warehouses and other working areas. Made from 100% recycled rubber, it features a textured surface intended to provide grip and protect the underlying floor from everyday wear.

Measuring 1.3m wide and 3mm thick, this rubber matting is available in varying lengths, with the source specifying a maximum length of 15m. Its flexible construction allows it to be cut to fit different spaces and installed using a suitable loose-lay or glue-down method.

Features & Benefits

Heavy-duty rubber construction: Designed for floor coverage in garages, workshops and other working environments.

100% recycled rubber: The listed material composition uses recycled rubber.

Textured non-slip surface: Intended to provide additional grip compared with smooth rubber sheeting.

3mm thickness: Provides a protective rubber layer over the existing floor.

1.3m width: Suitable for covering wider floor areas with fewer joins.

Waterproof design: Advertised to resist water and everyday moisture.

Cut-to-fit material: Can be trimmed using scissors or a suitable utility knife.

Flexible installation: Both loose-lay and glue-down installation are identified in the specifications.

Easy-clean surface: Described as suitable for cleaning with a broom, vacuum cleaner, mop or hose.

Textured Rubber Surface for Everyday Grip

The matting features a textured surface intended to help improve traction in areas used for walking or working.

It is marketed for garages, workshops and other environments where a protective floor covering is useful.

The source describes the surface using different pattern names, so the exact design should be confirmed before selecting it for a particular appearance or application.

Although the flooring is advertised as anti-slip, no independently tested slip-resistance classification is provided.

Rubber Floor Protection for Garages and Workshops

The rubber construction is intended to help protect the underlying floor from general contact, dirt and everyday wear.

The listing also advertises resistance to water, oil and chemicals, making the matting relevant for consideration in working environments. However, no specific chemical compatibility data or test standards are supplied.

The stated 65 Shore A hardness and 3MPa tensile strength provide additional material specifications, although the source does not identify the testing methods used.

For heavy machinery, vehicle loading or specialist industrial use, confirm that the material is suitable for the expected conditions.

Cut-to-Fit Flooring for Different Spaces

The 1.3m width allows the matting to be used across a range of floor layouts.

Suggested applications include garages, workshops, vans, warehouses, utility rooms, home gyms and storage areas.

The material can be trimmed to accommodate corners and obstacles. The source also describes the roll as flexible enough to be rolled up for storage when not in use.

For outdoor locations, poolside areas or other demanding environments, check whether the material is suitable for the intended exposure and surface conditions.

Installation and Measuring Guidance

Measure the area before ordering, allowing for any necessary trimming.

The listing identifies two installation approaches:

Loose lay: Positioning the matting without permanent adhesive.

Glue down: Fixing the rubber to a suitable prepared surface using an appropriate adhesive.

The source does not specify approved adhesives, subfloor requirements or edge-fixing methods. Confirm these details before installation, particularly in vehicle or high-traffic applications.

Cleaning and Maintenance

The rubber surface is advertised as easy to clean using a broom, vacuum cleaner, mop or hose.

Choose a cleaning method appropriate for the installation and follow any available manufacturer instructions. Avoid using strong chemicals without confirming their compatibility with the rubber.